BPS 1
(AC-DC 1 Watt Power Module)
1.03 x 0.89 x 0.53 inches
26.2 x 22.6 x 13.5 mm
(PDF) |
|
| Features |
The BPS 1 Standby Power Supply Module is an ideal replacement for current standby power applications in appliances and consumer electronics. This low-cost supply provides up to one half watt of output power at 8 or 14 VDC (Vo) to power standby functions such as a clock, microprocessor or remote control sensor. Incorporating a custom integrated circuit into a small package (0.5 in3 [8.0 cm3]) the BIAS Standby Module provides an immediate “dropin” solution, requiring no additional external components. |
| Electrical Specifications |
| Input Voltage Range |
85-265VAC |
| Frequency |
50/60 Hz |
| Input Surge Withstand |
308V, <30 Sec |
| Output Power |
1.0 W nom. (60Hz)
0.83 W nom. (50Hz) |
| Efficiency |
75% nom. |
| No-Load Consumption |
30mW typical @ 120VAC |
| Isolation |
3000VAC (meets UL/CSA & EN Product Safety) |
| Earth Leakage |
<10uA @ 120VAC |
| Short Circuit Protection |
Continuous |
| General Specifications |
| Operating Temperature |
0°C to +70°C |
| Storage Temperature |
-40°C to +105°C |
| Humidity |
0-95% non-condensing |
| Dimensions |
1.03 x 0.89 x 0.53 inches
26.2 x 22.6 x 13.5 mm |
| EMI |
EN 55022 Class B, FCC Part 15, B |
| Safety Compliance |
UL/EN 60950 |
Series Specifications |
|
Model Number
|
Output Voltage
|
Output Configuration
|
BPS 1-08-00 |
8VDC |
single output |
BPS 1-14-00 |
14VDC |
single output |
BPS 1-08-50 |
8VDC, 5VDC |
dual output |
|
